Detection and maintenance

1.Cutting heads, ceramic and nozzles are regularly cleaned.once a week.Wash the lens with anhydrous alcohol,Alcohol purity 99.9%.Attention:When cleaning the lens seal the window and nozzle with tape.

2.Check the seal of the lens every 2 weeks,To determine the tightness of the seal, the failure to replace.

3.Ceramic need to be checked regularly,General ceramic damage is due to dust,Dust on the ceramic causing sensor failure,collide during cutting.Touch the nozzle when you open the machine,check the sensor performance.Spray the ceramic every day with air gun.

Sealed picture